Professional LED Video Lights DSLR Camera Light with Magnetized Front Diffuser
Product Specifications
| Model NO. | LED312A |
| Dimension | 19x11.5x3.5cm |
| LED Type | COB |
| Power | 18.72 W |
| Color termperature | 5600K (±300K) |
| Illuminance | 1610Lux/m |
| CRI | ≥ 93 |
| LED Beam Angle | 60° |
| Materil | High quanlity ABS (not normaly plastic) |
| Color | Black |
What's Includied
1. 2×2200mAh Lithium battery
2. Battery charger and adapter
3. Car charger
4. Ball head
5. Diffuser
6. Color filter (yellow)
7. carrying bag
Product Characteristics
- LED312A is composed of 312pcs of white LEDs of high illuminance and accuracy .whose color temperature reaches to 5600K and lifetime 50000 hrs after strict screen.
- Handsome rectangular design,compact,light-weight and convenient to carry.
- It is heat free and remains consistent even as the battery voltage does down.It produces soft,bright light ray with standard color temperature daylight or tungsten.
- It is PMW integrated digital designed,dimmable from10% to 100%,flicker-free.
- It is suitable for indoor and outdoor photography and videography,portrait photography,and wedding photography,especially good for children photography.
Operation instructions
1. Install the battery onto the light.Turn on the power switch and light works
2. There is a power indicator light on the back of the light.Turn off the light and press the power test button to the check the battery level.
3. The battery level shows as below:
4. Please adjust the brightness of LED312A and adjust both the brightness and color temperature of LED312as accordingly.
5. There are four built -in magnets in the front of the light,and you can attach a diffuser with magnets to make the light rays much sofer.
6. When the battery runs out,press the installation and uninstallation button to take off the battery.It takes 4-5hrs to recharge it.
Cautions:
1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may seriously damage the battery or cause a
fire.
8. It is not allowed to throw the battery into fire.
Warranty:
The LED light is guaranteed for 12 months.
The battery is guaranteed to be charged and discharged for 500 times.
Product Tags:
|
|
Professional LED Video Lights DSLR Camera Light with Magnetized Front Diffuser Images
|
